Filter
Top Products
StreetPilot 7200/7500 Owner’s Manual 21
LoadinG fiLes on yoUr streetPiLot
Your StreetPilot 7200/7500 can store les, such as MP3
music les and Custom POIs. Using the USB Mass
Storage mode, copy and paste les to the StreetPilot
internal memory or to an optional SD card.
Step 1: Load the USB Drivers
Before connecting the USB cable to your computer,
place the enclosed USB driver disk into your computer’s
disk drive.
If the program does not start automatically, click Start
and then Run…. Type the letter of your disk drive
followed by “setup” (example: “D:\setup”). Then press
Enter.
Follow the instructions on your computer’s screen.
Step 2: Connect AC Power
Connect the enclosed AC Power cable to the Power
connector on the right side of the StreetPilot. Connect
the end to an available electrical outlet.
Step 3: Insert an SD Card (Optional)
The SD card slot is located on the left-hand side of the
StreetPilot. Press the card in until it clicks.
Inserting an SD Card
loadinG files on yoUr sTreeTPiloTfiles on yoUr sTreeTPiloT