Filter
Top Products
StreetPilot 7200/7500 Owner’s Manual 37
traffic inforMation
Traffic inforMaTion
Using an FM Trafc Receiver or an XM Smart Antenna,
your StreetPilot 7200/7500 can receive and use trafc
information. When a trafc message is received, your
StreetPilot displays the event on the map and can change
your route to avoid the trafc incident.
For more information about the FM Trafc Receiver
or XM Smart Antenna, visit the Garmin Web site
(www.garmin.com). For participating FM subscription
providers and covered cities, refer to www.garmin.com
/fmtrafc. For coverage cities (North America only) for
XM NavTrafc, see www.xmnavtrafc.com.
NOTE: This section uses “Trafc Module” to
describe the external device that receives trafc
information. The FM Trafc Receiver (such as the
GTM 10
™
) or the XM Smart Antenna (such as the
GXM 30
™
) can be used.
Connecting the Trafc Module to
Your StreetPilot
Plug the cable from the Trafc Module into the USB
connector on the right side of the StreetPilot.
Viewing Trafc Events
From the Menu page, touch Tools > Trafc Info. Select
an item in the Trafc Events list to view the details.
Touch Near… to view trafc at a different location.
Color
code
Trafc symbol
Trafc Events List
Trafc
source
(FM or
XM) and
signal
strength