Garmin 700 Series GPS Receiver User Manual


 
32 nüvi 700 Series Owner’s Manual
USinG fM traffic
UsinG fM Traffic
The trafc receiver is included in some
nüvi 710, 750T, 760, and 770 packages.
Use an FM TMC (Trafc Message
Channel) trafc receiver to receive
trafc information broadcast over the
FM Radio Data System. For information
about FM trafc receivers and coverage
areas, see www.garmin.com/trafc.
NOTE: Garmin is not responsible
for the accuracy of the trafc
information. The FM trafc
receiver simply receives signals
from the trafc service provider
and shows that information on
your nüvi.
NOTE: The FM trafc receiver
and nüvi must be in data range of
an FM station transmitting TMC
data to receive trafc information.
NOTE: You can only access the
trafc information if the nüvi
is connected to an FM trafc
receiver.
To power
connector on
nüvi cradle
To power outlet
in vehicle
Power
LED
Status
LED
NOTE: If your FM TMC trafc
receiver has an antenna with
suction cups on it, route the
antenna on your windshield
vertically using the suction cups.
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash ashes:
determining which country you
are currently in.