Filter
Top Products
2 Nissan Portable Navigation Owner’s Manual
GettinG Started
Step 1: Mount the PND
1. Open the lid on the Type 1
mounting unit, or remove the base
cover on the Type 2 mounting unit.
Attach the arm assembly to the
Type 2 mounting unit.
Type 1 mounting unit
Lid
Cradle
Release
Tab
Speakers
(if equipped)
Type 2 mounting unit
Arm
Assembly
Release
Tab
Arm Assembly
Release Tab
Base
Cradle
Base
Cover
2. Fit the bottom of your PND into
the cradle.
NOTE: Install the base cover on
Type 2 units when the arm is not
in place for protection and look.
3. Tilt the PND back until it snaps
into place. Your unit automatically
turns on if your vehicle is running.
Cradle
Release
Tab
You can adjust the PND to the
left and right. Use the lid of the
Type 1 mounting unit or the
cradle on Type 2 to adjust the
PND up and down.
To remove the PND from the
mount, press the release tab
at the bottom of the cradle and
remove the unit.
•
•
WARNING: This product
contains a non-replaceable
lithium-ion battery. See the Important
Safety and Product Information guide
in the product box for important
battery safety information.