Garmin 750 GPS Receiver User Manual


 
Nissan Portable Navigation Owner’s Manual 33
aPPendix
aPPendix
Ways to Charge Your
PND
Use the cradle.
Use the USB cable.
Use the AC wall charger.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen. Turn
the PND off and then back on. Slide the
Power key to the right (lock). Hold your
nger on the screen for about 30 seconds
until the calibration screen appears.
Follow the on-screen instructions.
Resetting the PND
If the screen stops functioning, turn the
PND off and on again. If this does not
help, slide the Power key to the left and
hold for 8 seconds. Turn the PND back
on. The PND should operate normally.
Locking Your PND
Garmin Lock is a theft-deterrent system
that locks your PND. Each time you turn
on the PND, enter the PIN or drive to the
security location.
1. Touch Tools > Settings >
Security.
2. Touch the button below Garmin
Lock.
3. Enter a 4-digit PIN and drive to a
security location.
What is a Security Location?
Select a location you return to often,
such as your home, for your security
location. If the PND has satellite signals
and you are at the security location, you
do not need to enter the PIN.
NOTE: If you forget your PIN
and your security location, you
must send your PND to Garmin
to get it unlocked. You must also
send a valid product registration
or proof of purchase.