Filter
Top Products
Garmin Mobile
™
for BlackBerry
®
set up and go! 3
If the GPS 10x receiver has not established a
Bluetooth connection for several minutes, it turns off
automatically.
To manually turn the GPS 10x receiver off, press and
hold the Power button.
➎
Pair the GPS 10x Receiver
Bluetooth wireless technology establishes a wireless
link between your BlackBerry device and the GPS 10x
receiver. Before you can use the GPS 10x receiver, you
must “pair” it with your BlackBerry device.
Make sure your BlackBerry device and GPS 10x
receiver are turned on and within 10 meters (about
30 feet) of each other.
Enable your BlackBerry device’s Bluetooth
component. This might be in Options > Bluetooth
or Settings > Bluetooth.
Initiate a search for Bluetooth devices.
Select GPS 10x from the list of devices.
Enter the GPS 10x receiver’s Bluetooth passkey
(1234) into your BlackBerry device.
1.
2.
3.
4.
5.
For instructions about pairing and Bluetooth, refer to
your BlackBerry device’s documentation.
The GPS 10x receiver and your BlackBerry device
automatically connect when they are both turned on
and within 10 meters (about 30 feet) of each other.
➏
Complete the Software
Installation
Follow the link on your BlackBerry device to
download the Garmin Mobile software.
Open the Garmin Mobile application on your
BlackBerry device.
Follow the on-screen directions to test the
Bluetooth connection.
To activate the software, enter the activation code
(from step 3 of ➊ Install the Navigation Software
on page 1) .
If you have lost your activation code, sign in to your
myGarmin account at http://my.garmin.com. Click
Garmin Mobile for BlackBerry, and then click
Regenerate Activation Code
.
1.
2.
3.
4.