Filter
Top Products
ROUTES
TO ACTIVATE A ROUTE:
❏
Press
R
and rotate
O
to display the route catalog page.
❏
Rotate
K
to display the desired route.
❏
Press
C
twice to activate the cursor in the GPS window.
❏
Rotate
K
to select the ‘activate?’ option from the route action field.
❏
Press
E
. The route will be copied into route 0 (the active route).
TO DELETE/STOP NAVIGATING A ROUTE:
❏
Follow the first three steps described above.
❏
Rotate
K
to select the ‘delete?’ option and press
E
.
TO REVIEW ROUTE WAYPOINTS FROM THE
ACTIVE ROUTE PAGE
:
❏
With the cursor off, rotate
K
in the direction of the arrow prompts.
❏
To manually select your next route waypoint, highlight the desired way-
point with the flashing cursor and press
D
, followed by
E
. The
GNC 250 will provide direct navigation guidance to the selected way-
point and resume navigating the remainder of the route in sequence.
TO HOLD ON A ROUTE WAYPOINT:
❏
Highlight the route waypoint you want to hold on and press
D
.
❏
Rotate
O
to highlight the waypoint sequencing field and use
K
to
select the ‘hold’ setting. Press
E
to accept.
❏
Use
K
and
O
to enter the desired course. Press
E
to confirm.
❏
Press
E
to confirm the ‘ok?’ prompt. The CDI page will display the
course at the bottom left of the page.
ACTIVATING AND DELETING ROUTES FLYING THE ACTIVE ROUTE
250 Quick Ref 7/14/98 9:14 AM Page 20