Filter
Top Products
The GNC 250’s direct-to confirmation page may also be used to select a destination waypoint, review a waypoint’s position,
facility name or location, and manually set a course to/from the destination.
TO SELECT A DIRECT-TO DESTINATION:
❏
Highlight the identifier field and enter the identifier using
K
and
O
. Press
E
when finished.
TO REVIEW THE LOCATION/FACILITY NAME OF THE DIRECT-TO WAYPOINT:
❏
Highlight the location field and rotate
K
.
TO ENTER A DESIRED COURSE TO OR FROM THE DESTINATION WAYPOINT:
❏
Highlight the course select (‘crs’) field and use
K
and
O
to enter the desired course. Press
E
when finished.
USING THE DIRECT-TO CONFIRMATION PAGE
DIRECT-TO
250 Quick Ref 7/14/98 9:14 AM Page 12