Filter
Top Products
The GNC 250’s waypoint sequencing field allows you to ‘hold’ on a
selected waypoint and prevent the GPS from sequencing to the next
route waypoint. You may also use the hold mode with the course
select feature to maintain a user-defined course to the hold waypoint.
TO HOLD ON A WAYPOINT:
❏
Set the waypoint sequencing field to the ‘hold’ setting by
highlighting the waypoint sequencing field and rotating
K
one stop in either direction.
❏
To enter a desired course to or from the destination waypoint,
highlight the ‘crs’ field and use
K
and
O
to enter the
desired course.
❏
Press
E
when finished.
DIRECT-TO
Waypoint sequencing field set to AUTO.
Waypoint sequencing field set to HOLD.
WAYPOINT SEQUENCING AND HOLD MODE
250 Quick Ref 7/14/98 9:14 AM Page 13