Filter
Top Products
The route editing function allows you to create new routes and edit existing
routes. Creating routes before takeoff can help make route operations easier during
your flight.
To create or edit a route from the route catalog page:
1. Use
K
to display the route number you would like to edit.
2. Press
C
twice.
3. Use
K
to select ‘edit?’. Press
E
. The route review page will appear.
To add a waypoint:
4. Rotate
O
to highlight the first blank waypoint field or the point where you want to enter
the new waypoint. The first waypoint field will flash if you’re creating a new route.
5. Use
K
and
O
to enter the waypoint’s identifier. Press
E
.
6. Press
E
to confirm the ‘ok?’ prompt on the waypoint confirmation page.
7. Repeat steps 4 through 6 to add the next waypoint, or press
C
to finish.
To delete a waypoint:
1. Rotate
O
to highlight the waypoint you wish to delete.
2. Press
\
to remove the name, then press
E
to delete.
3. Repeat steps 1 and 2 to delete additional waypoints, or press
C
to finish.
To delete an entire route:
1. Use
K
to display the route number you would like to delete (route 0 for the active route).
2. Press
C
twice and use
O
to highlight the action field.
3. Use
K
to select ‘delete?’. Press
E
to delete.
63
APPENDIX A
Runway Length &
Display Timeout
Selecting the route edit function.
Adding a waypoint to route 1.
SECTION
5
ROUTES
Creating &
Editing Routes
300 7/14/98 8:50 AM Page 63