Filter
Top Products
The second and third lines of the satellite status page provide the satellite number
and signal strength of each satellite in view. Additional information regarding each
satellite’s azimuth, elevation and other data is also available.
To view individual satellite information:
1. Press
N
and use
O
to display the satellite status page.
2. Press
C
twice to activate the cursor in the GPS window.
3. Use
O
to highlight the satellite number you wish to view and press
E
.
This will display the satellite data page, showing the selected satellite’s number,
elevation angle, rise or fall indication, user range accuracy (URA, or the range
measurement accuracy as determined by the satellite), azimuth and signal strength.
To view other satellites:
4. Rotate
K
to view information for the next satellite.
5. Rotate
O
to return to the satellite status page and press
C
on the satellite status
page when you are finished.
18
REFERENCE
Fuel Planning
Viewing individual satellite information.
SECTION
1
NAV KEY
Satellite Data Page
300 7/14/98 8:49 AM Page 18