Filter
Top Products
4 GPSMAP 5000 Series Owner’s Manual
Getting Started
GettinG
Started
Restoring the Original Factory Settings
CAUTION: This procedure deletes any information you have entered.
1. From the Home screen, touch Congure > System > System Information > Factory Settings
> Reset.
2. Select an option:
Touch Yes to restore all factory settings.
Touch No to exit without restoring factory settings.
Viewing System Information
You can view the software version, basemap version, unit ID number, and your XM WX Weather
®
radio ID (if available). You may need this information to update the system software or purchase
additional map data information.
From the Home screen, touch Congure > System > System Information.
Using the Simulator Mode
Simulator mode turns the GPS receiver off for use indoors or for practice. The chartplotter does not
track satellites in simulator mode.
CAUTION: Do not try to navigate using simulator mode because the GPS receiver is turned off. Any
satellite signal strength bars shown are only simulations and do not represent the strength of actual
satellite signals.
1. From the Home screen, touch Congure > System > Simulator > On.
2. Touch Setup to set speed, track control (simulated heading), position, simulator time, and
simulator date.
•
•