Filter
Top Products
Garmin Mobile™ 20 set up and go! 5
GPS 20SM LED Status Indicators
The blue LED indicates the GPS Bluetooth connection.
The green LED indicates the hands-free connection.
Blue Bluetooth GPS LED Status
Blue ashing: making GPS Bluetooth connection
Blue steady on: GPS Bluetooth connection made
Blue and green steady on: GPS and hands-free
connection made (not supported by all phones)
Green Bluetooth Hands-free LED Status
Green steady on: hands-free connection made
Green rapid ashing: incoming call
Green ashing: call in progress
GPS 20SM Beep Meanings
High short beep: hands-free connection made
between GPS 20SM and phone
Low short double-beep: hands-free connection
ended between GPS 20SM and phone
Adjusting the Volume
Press the wheel on the right side of the phone mount
UP
to raise volume or DOWN to lower. Press AND
HOLD
UP or DOWN to quickly adjust the volume.
•
•
•
•
•
•
•
•
Using the Hands-free Wheel
Press the wheel on the right side of the phone mount
IN to perform hands-free operations:
Quickly Press to… Press and Hold to…
Not
Connected
connect to the
previously paired
phone
Connected use voice dial (if
supported by your
phone)
dial the last number
dialed
In a Call hang up the call transfer the call to your
phone so you can walk
away from the GPS
20SM while on a call
Incoming
Call
answer an incoming
call
reject an incoming call
(On most phones and
plans, rejecting the call
sends it to your voice
mail.)
Note: You may have to adjust the earpiece volume on
your phone to maximize the audio output of the GPS
20SM. See your phone’s documentation.