Garmin 1100 GPS Receiver User Manual


 
2 nüvi 1100/1200/1300/1400 Series Owner’s Manual
Getting Started
Setting Up Your nüvi
Before mounting the nüvi, see the Important Safety and Product Information guide for information
about laws pertaining to windshield mounting.
Mounting Your nüvi
1. Remove the clear plastic from the suction cup. Place the suction cup on the
windshield.
2. Flip the lever back toward the windshield.
3. Snap the cradle onto the suction cup arm.
4. Plug the vehicle power cable into the back of
your nüvi.
5. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it is
plugged in and the vehicle is running. Follow the on-screen instructions.
6. Fit the bottom of your nüvi into the cradle.
7. Tilt your nüvi back until it snaps into place.
8. If you are using a trafc receiver in Europe,
connect the external antenna to the trafc
receiver and secure it to the windshield using
the suction cups. (Trafc receivers are included
in some nüvi packages. See page iv.)
: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
Suction cup mount
Cradle
Vehicle power
cable