Fusion CE-99200 Automobile Alarm User Manual


 
14
15
PUBLISHED BY FUSION ELECTRONICS LIMITED:
© Copyright 2007 by FUSION Electronics Limited.
All rights reserved. Specifications and design are
subject to change without notice.
Cut Existing Unlock
X
LockUnlock
OEM Door Master Lock
To All Other
Door Lock
Motors
Red / White
OEM Driver's
Door Lock
Motor
+12V
Blue / Red
ExistingPos.
Lock Wire
Existing Pos.
Unlock Wire
30
87A
87
86 85
+12V
Blue / White
Green / White
Green / Yellow
Blue / Yellow
+12V
OEM Door
Lock Relay
6-Pin
Door
Lock
Wire
Harness
2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR POSITIVE SWITCHED
DOOR LOCKS
SPECIFICATIONS:
Power supply: 10 VDC – 16 VDC
Operating temperature: -40 °C – +80 °C (-40 °F – +176 °F )
TX Frequency: 433.92 M Hz
POWER CONSUMPTION:
Indicator light flash output: 15 Amp
Door Lock: 10 Amp
Door Unlock: 10 Amp
Security system (disarmed): 15 mA
Note: Remote control range is dependant on weather conditions and
alarm installation.
THE FUSION CE-SS200 SECURITY SYSTEM COMPLIES WITH:
FCC:
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Z105
YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations:
Hand in the non-working electrical equipment
to an appropriate waste disposal center.