Filter
Top Products
3-15
3.8 USER CLUTTER SETTING Menu
The USER CLUTTER SETTING menu lets you emphasize weak to medium strength echoes.
The settings of this menu are active when selecting CUSTOM on the CLUTTER menu.
DISP ALM TX/RX USER-1/2 SYSTEM
Set clutter level to be displayed.
[-/+]: Change set, [EXIT (knob)]: Exit
USER CLUTTER SETTING
The larger setting
value, the wider
ratio of the color
selected.
COLOR-7 : 3 (1 14)
COLOR-6 : 3
COLOR-5 : 3
COLOR-4 : 3
COLOR-3 : 3
COLOR-2 : 3
COLOR-1 : 3
BACKGROUND : 3
DEFAULT SET : NO
When the value is not suitable,
weak level is automatically adjusted.
USER CLUTTER SETTING menu
1. Press the [!] or ["] key to select color or background to change. COLOR-7 is the strongest
color.
2. Press the [-] or [+] key to show the setting window.
0
Setting window
3. Press the [-] or [+] key to set the level (1-14).
If then
you want to emphasize COLOR-7 (reddish
brown, red)
COLOR-7, COLOR-6: set large value.
COLOR-5 to COLOR-1: set small value.
you want to emphasize middle color (yellow,
green)
COLOR-7 to COLOR-5: set small value.
COLOR-4 and COLOR-3: set large value.
COLOR-2 and COLOR-1: set small value.
you want to remove the weakest color COLOR-1: set small value.
4. Press the [!] or ["] key to close the setting window.
5. Repeat steps 1 through 4 to set other color.
To return to default setting, select YES at DEFAULT SET.