Filter
Top Products
5
Attaching coaxial connector (M-P-5) to coaxial cable
The antenna cable (coaxial cable, type 5D-2V) is terminated at the FA-30 with an
M-P-5 coaxial connector. Attach the connector to the cable as shown below.
Connection of AIS viewer (FAISPC-MX)
The AIS viewer may be connected to the FA-30 directly, or to both FA-30 and NavNet
vx2. See the figure below for connection examples.
Sheath
30 mm
7 mm
2
mm
Conductor
Insulator
Braided
shield
Fasten tightly.
Contact sleeve
Cut conductor here.
Coupling
ring
Solder here.
Solder here.
DIRECT CONNECTION
PC
FAISPC-MX
FA-30
NavNet
VX2
LAN
Data sentences
VDM, VDO,
L/L, SOG, COG, HDT
NavNet vx2 CONNECTION
PC
FAISPC-MX
FA-30
LAN
Data sentences
VDM, VDO