Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-2
Contents of general menu
Item Description Settings Default Setting
Key Beep Turns key operation beep on/off. On, Off On
Language Chooses menu language. English, French, German,
Italian, Portuguese, Spanish
English
Range Unit Chooses unit of range and speed
measurement.
nm, kt; km, km/h; sm, mph;
nm & yd, kt; nm & m, kt; km
& m, km/h; sm & yd, mph
nm, kt
Temperature
Unit
Chooses unit of water temperature
measurement.
°C, °F °F
Depth Unit Chooses unit of depth measurement. ft, m, fa, PB (Passi/Braza) ft
Temperature
Source
Chooses source of water temperature data. ETR (network sounder),
NMEA
NMEA
Depth Source Chooses source of depth data. ETR, NMEA. NMEA
Reset Trip Log Resets distance run. Yes, No No
Lat/Lon Display Chooses how many digits (or seconds) to
display after decimal point in latitude and
longitude position.
DD°MM.MM’,
DD°MM.MMM’,
DD
°MM.MMMM’,
DD
°MM’SS.S”
DD
°MM.MMMM’
TD Display Chooses TD type. Loran C, Decca Loran C
Speed Chooses speed format to display. SOG (Speed over ground),
STW (Speed through water)
SOG
Position Display Chooses position display format. LAT/LON, TD LAT/LON
Time Display Chooses time notation. 12 hours, 24 hours 24 hours
Infrared
Remote Mode
A remote controller can be set
exclusively for use with a specific
display unit, in the case of multiple
NavNet display units. For further details
see the Installation Manual.
A, B, C, D A
Range &
Bearing Mode
Chooses how to calculate range and bearing.
Rhumb Line: Straight line
drawn between two points
on a nautical chart.
Great Circle: Shortest course
between two points on the
surface of the earth.
Rhumb Line
Bearing
Readout
Chooses bearing display format for course,
course over ground and cursor bearing.
True, Magnetic
Magnetic
Magnetic
Variation
The magnetic variations for all areas of the
earth are preprogrammed into this unit. The
preprogrammed variation is accurate for most
instances, however you may wish to manually
enter a variation. For manual input, select
Manual, hit the EDIT soft key, enter value and
hit the ENTER soft key to finish. “AUTO”
requires position data.
Auto, Manual
Auto
Display Mode
(Monochrome
model)
Reverses background (black) and foreground
(white) colors.
Day, Night Day
*Select ETR to show water temperature/depth data fed from the network sounder, and then set the TEMP
and DEPTH CALIBRATION of the SENSOR SETUP in the SOUNDER SYSTEM SETUP menu.