Filter
Top Products
Dealer Instructions 12
OPTIONAL-HYDRAULIC KIT
In place of the turnbuckle (seen in from step
15), place the optional hydraulic kit as shown
.
OPTIONAL-LOCATE RIPPERS
Place in keeper position as shown.
ATTACH ALL TINES
While the Rake is still on the pallet, adjust
the ratchet jack so that the tine bar is at its
highest point so that the tines will be easy to
load into the tine bar from the under side.
Warning:
DO NOT LAY UNDER THE RIATARAKE.
Then install all the tines one at a time attach-
ing the provided brass washer and spring
clip to the top of each tine.
18
19
17