Filter
Top Products
Dealer Instructions 10
REMOVE LAG BOLTS THAT CONNECT
TINE BAR TO PALLET
Remove lag bolts—left and right side on tine
bar.
ATTACH RATCHET JACK TO THE MAST
Attach the top end of the Ratchet Jack us-
ing the supplied 1" Pin which was temporarily
removed.
ELEVATE THE TINE BAR
Elevating the tine bar using a pry bar placing
a 4" block between the pallet and the tine bar.
10
11
12
13
9
LOCATE LAG BOLTS THAT CONNECT TINE
BAR TO PALLET
ATTACH RATCHET JACK TO THE TINE BAR
Temporarily remove the 1” Hitch Pin in the
spine for attaching the ratchet jack.
ATTACH RATCHET JACK TO THE TINE BAR
Attach the end of the Ratchet Jack to the
brackets in the top of the tine bar using the
supplied 1" Pin. You may be required to raise
or lower the tine bar to attach.
14