Filter
Top Products
Dealer Instructions 8
EXTEND RATCHET JACK
Ratchet Jack is attached to tine bar of unit.
Fully extend the ratchet jack for later assem-
bly.
REMOVE PALLET SIDE/CROSS BRACING
Removing the side bracing and cross brac-
ing will provide access to assemble Riata
Rake.
POSITION SPINE DIAGONAL MEMBERS
1) Lift spine diagonal to a vertical position (two
person operation) then 2) lift the mast to a
vertical position. Diagonal ts over the vertical
mast.
1
2
4a
3
DISCARD PALLET BRACING
Removing the side bracing and cross brac-
ing will provide access to assemble Riata
Rake.
CONNECT SPINE DIAGONAL MEMBERS
After joining spine mast and diagonal, connect
using the 1" the mast to a vertical position.
4b