Filter
Top Products
T6991a-0920
14
ASSEMBLY
• Turn the vehicle upright.
• Insert both tabs on the back edge of the seat into the
slots inside the bed.
• Insert two screws through the back of the seat and
into the vehicle. Tighten the screws.
24
23
Slots
Seat
Screws
BACK VIEW
• Fit the long tabs on the hood into the slots in the front
end of the vehicle.
• Pull the hood forward and lower.
Note: The hood is held down by magnets. Simply lift
to open the hood. Do not use around items that are
sensitive to or affected by magnetic fields.
26
• Insert two screws into the tabs on the front edge of
the seat and tighten.
Screws
Screws
Hood
Hood
25
TOP VIEW
FRONT VIEW