Filter
Top Products
T6991a-0920
12
• Fit the pegs on the underside of the grille support into
the receptacles on the vehicle.
• Insert two screws into the grille support and tighten.
16
• Slide a rear wheel onto the rear axle.
Hint: Note the number on the inside of the wheel and
on the bottom of the vehicle near the rear axle. The
rear wheel with a 1 should match the 1 on the vehicle
and the rear wheel with a 2 should match the 2 on
the vehicle.
17
Screws
Rear Wheel
Rear Axle
2
ASSEMBLY
• Slide the clip so that the straight end goes through the
other hole in the axle.
• Make sure the straight end of the clip is through both
holes in the axle.
18
19
• Position the wire clip so that the wavy side is out.
• Insert the straight side of the clip through the hole in
the axle.