Ford FCS-15101-10 Automobile User Manual


 
3-6 Mounting
Section 3: Mounting
Air Bag Deployment Interference
WARNING: Do not place objects or mount equipment in front of the air bag module
cover or in front seat areas that may come in contact with a deploying air bag. Dash-,
tunnel- or console-mounted equipment should be placed within the specified zone. Failure
to follow these instructions may result in personal injury.
WARNING: Do not put anything on or over the air bag module. Placing objects on or
over the air bag inflation area may cause those objects to be propelled by the air bag into
your face and torso, causing serious injury.
WARNING: Dash-, tunnel- or console-mounted equipment should not be placed
outside of the specified zone. Failure to follow these instructions may result in personal
injury.
WARNING: Do not mount equipment between the side of the front seat and the door
trim that would block deployment of the side air bag (if equipped). Failure to follow these
instructions may result in personal injury.
WARNING: Do not attempt to service, repair or modify the airbag supplemental
restraint systems or its fuses. See your Ford or Lincoln Mercury dealer. Failure to follow
these instructions may result in personal injury.
WARNING: Modifications to the front end of the vehicle, including frame, bumper,
front end body structure, tow hooks and B-pillar surrounding parts may affect the
performance of the airbag sensors, increasing the risk of injury. Do not modify the front
end of the vehicle.
WARNING: Do not place objects or mount equipment on or near the headliner at the
siderail that may come into contact with a deploying safety canopy (if equipped). Failure to
follow these instructions may increase the risk of personal injury in the event of a collision.
2010 Escape Hybrid, Mariner Hybrid Modifiers Guide, 07/2009