Filter
Top Products
Mounting 3-5
Section 3: Mounting
Side Impact Sensor (if equipped)
The side impact sensors are located in the base of the B-pillars. They are positioned below the
safety belt retractors. The location and orientation are critical for the correct operation of all the
impact sensors. Do not use the attachment bolts of the impact sensors to mount any equipment.
Console Design and Installation
Restraints Control Module (RCM)
The restraints control module (RCM) is mounted on the center tunnel under the instrument panel.
The RCM orientation is critical for proper operation of the restraint systems. Do not use the RCM
mounting bolts for attachment purposes of any equipment.
2010 Escape Hybrid, Mariner Hybrid Modifiers Guide, 07/2009