Filter
Top Products
2-8 Electrical
Section 2: Electrical
4. Remove the service disconnect plug.
a. Rotate the service disconnect plug from the LOCK (1) position to the UNLOCK (2) position.
b. Remove the service disconnect plug and place in the SERVICE SHIPPING (3) position.
5. NOTICE: Place the service disconnect plug into the SERVICE SHIPPING position while
carrying out any vehicle modifications. If the service disconnect plug is left out and
placed on the bench or toolbox, dirt or other contaminants may enter the high voltage
traction battery (HVTB), which can cause damage.
Insert the service disconnect plug into the SERVICE SHIPPING position. This disconnects the
HVTB.
6. To connect, reverse the disconnect procedure.
2010 Escape Hybrid, Mariner Hybrid Modifiers Guide, 07/2009