Filter
Top Products
2. Scroll until System Settings is selected and press OK.
3. Scroll to select Bluetooth Devices and press OK to access:
• Add Bluetooth Device • Delete Device
• Connect Bluetooth Device • Delete All Devices
• Set Primary Phone • Return
• Set Bluetooth On/Off
Scroll to select Advanced and press OK to access:
• Prompts • Languages
• Factory Defaults • Master Reset
• Install Application? • System Info
• Return
Refer to the following sections for further information.
Adding (pairing) a phone
Note: This is a speed dependent feature and cannot be performed when
the vehicle is traveling at speeds greater than 3 mph (5 km/h).
Note: SYNC can store up to 12 previously paired devices.
To add/pair an additional Bluetooth enabled device(s) to SYNC:
Note: To scroll, press
/ .
1. Press PHONE to enter the Phone Menu
2. Scroll until System Settings is selected and press OK.
3. Scroll until Bluetooth Devices is selected and press OK.
4. Scroll until Add Bluetooth Device is selected and press OK.
5. When Find SYNC appears in the display, press OK. Follow the
instructions in your device’s user guide to put your phone into discovery
mode. A six digit PIN will appear in the radio display.
6. When prompted on your phone display, enter the six digit PIN.
7. Once pairing is successful, the device name and then Connectingѧ and
then Connected will appear in the radio display. Depending on the
functionality of your phone, you may be asked additional questions.
8. SYNC will ask if you would like to set this phone as a Primary phone.
(This means that SYNC will automatically attempt to connect to this
phone with every connection cycle.) Press OK.
Entertainment Systems
71
2011 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)