Filter
Top Products
Making a call
Making a hands-free phone call using SYNC is easy.
1. Press
.
2. When prompted, say, “Call <name>” or say the desired number and
then say “Dial”.
To erase the last spoken digit, say “Delete”.
To erase all spoken digits, say “Clear”.
3. Once the desired number/contact is on the screen, either say “Call” or
“Dial”. The system will connect to the desired number.
Note: Once the call is placed, it will be logged into your outgoing call
history folder.
Note: You can also manually enter the desired number by pressing the
presets (0–9).
Ending a call
At any time, you can end an active phone call by pressing and
holding
or PHONE.
Exiting phone mode
When in phone mode but not in an active call, press and hold
or
PHONE to exit phone mode.
Answering an incoming call
An incoming call interacts with SYNC in much the same way it interacts
with your Bluetooth enabled cellular phone. During an incoming call:
• An audible ring tone will sound. If available, call information will
appear in the display.
• Select from the following options:
Accept the call by pressing
or PHONE. The call will be
transferred to hands-free and logged into the incoming call history folder.
Ignore the call by doing nothing. SYNC will log the call as a missed
call.
Reject the call by pressing and holding
or PHONE. SYNC will log
the call.
Incoming new text message
Note: This is a phone dependent feature.
Entertainment Systems
51
2011 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)