Using the N (Neutral) position
The transfer case neutral position overrides the transmission and
puts the vehicle in neutral regardless of transmission gearshift
lever position. The vehicle can move forward or backwards.
This position should only be used
when towing the vehicle. Refer to
Wrecker towing in the Roadside
emergencies chapter.
Do not leave the vehicle unattended with the transfer case in the
N (Neutral) position. Always set the parking brake fully and turn
off the ignition when leaving the vehicle.
Using the electronic shift 4WD system (if equipped)
Positions of the electronic shift system
2H (2WD High) – Power to rear axle only.
4H (4WD High) – Power delivered to front and rear axles for increased
traction.
4L (4WD Low) – Power to front and rear axles at low speeds.
Shifting from 2H (2WD high) to 4H (4WD high)
Move the 4WD control to the 4H at
a stop or up to 88 km/h (55 mph).
At temperatures below 0°C (32°F),
shifts from 2H to 4H should not be
performed above 72 km/h (45 mph).
• Do not shift into 4H with the rear
wheels slipping.
2H
4H
4L
N
4H
2H
4L
Driving
130