Filter
Top Products
WINDSHIELD WIPER/WASHER
CONTROLS
Rotate the windshield wiper
control to the desired interval, low
or high speed position.
The bars of varying length are for
intermittent wipers. When in this
position rotate the control upward
for fast intervals and downward for
slow intervals.
Push the control on the end of the
stalk to activate washer. Push and
hold for a longer wash cycle.
Speed dependent wipers (if
equipped)
When the windshield wiper control
is set on the intermittent settings,
speed-sensitive front wipers
automatically adjust as the
vehicle’s speed increases.
To activate or deactivate this
feature do the following:
1. Both front doors must be
securely closed.
2. Turn the ignition key to the ON
position and then back to the OFF
position.
3. Remove the key from the
ignition and, within 30 seconds,
press and hold the washer control
at the end of the stem.
Controls and features
34