Filter
Top Products
Remove fresh spots immediately.
Follow the directions that come
with the cleaner.
Cleaning and maintaining the
safety belts
Clean the safety belts with a mild
soap solution recommended for
cleaning upholstery or carpets. Do
not bleach or dye the belts,
because these actions may weaken
the belt webbing.
Check the safety belt system
periodically to make sure there are
no nicks, wear or cuts. If your
vehicle has been involved in an
accident, refer to the Safety belt
maintenance section in the
Seating and safety restraints
chapter.
Cleaning leather seats (if
equipped)
For routine cleaning, wipe the
surface with a soft, damp cloth.
For more thorough cleaning, wipe
the surface with a mild soap.
If the leather cannot be completely
cleaned using a mild soap and
water solution, the leather may
cleaned using a commercially
available cleaning product
“Tanners Preserve Leather
Cleaner” and a 3M “Type T’
scrubbing pad by using the
following steps;
The type of scrubbing pad is
very critical because the
common 3M “Scotch Brite”
green pad is too aggressive and
Maintenance and care
202