Filter
Top Products
13
W2602pr-0920
Front Fenders
• Fit the front fenders onto the front of the vehicle,
as shown.
Hint: The front fenders are designed to fit one way. If
a front fender does not seem to fit, try the other one!
27
ASSEMBLY
Sidebar Cover Sidebar Cover
• Fit the sidebar covers onto the sidebars, as shown.
Hint: The sidebar covers are designed to fit one way. If
a sidebar cover does not seem to fit, try the other one!
• Insert a #8 x ¾" (1,9 cm) screw into each sidebar
cover and tighten.
26
• Insert six #8 x ¾" (1,9 cm) screws into the fenders
and tighten.
28
TOP SIDE VIEW
Sidebar with
Curve Out
Sidebar with
Curve Out
• Fit the sidebars into the slots in the vehicle frame and
rear fenders.
Hint: Each sidebar is designed to fit one way. Make sure
the sidebar curves outward and the tabs on the ends fit
into the slots in the vehicle and fenders.
25
Tabs
Tabs