Filter
Top Products
11
W2602pr-0920
Rear Fenders
• Fit the rear fenders under the tabs the sides of the seat,
as shown.
19
ASSEMBLY
• Insert three #8 x ¾" (1,9 cm) screws into each valve
cover and tighten.
16
Note: Make sure the fasteners on both short seat belts
face each other.
• Fit the folded end of each short seat belt down
through the outer slots in the seat. Do not insert the
folded tab into the slot. Pull up on each seat belt to
make sure it is secure.
17
Folded
Folded
End
End
Folded
Folded
Tab
Tab
Short Seat Belts
Long Seat Belt
Fastener
Side
Fastener
Side
Note: Make sure the fasteners on the long seat belt are
facing the fasteners on the short seat belts.
• Insert the ends of the long seat belt up through the
slots in the center of the seat.
• Fit the folded tabs on the belt up through the slots
in the center of the seat to keep the long seat belt in
place. Make sure the folded tabs are on visible on the
top side of the seat.
18
Folded
Folded
Tab
Tab