Filter
Top Products
P8990a-0920
IMPORTANT! Use only a Power Wheels
®
6 volt lead-acid
rechargeable battery. Use of any other battery will damage
your vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels
®
6 volt charger
before operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
• Squeeze the battery retainer arms together to release them
from the slots in the vehicle.
• Press the battery retainer arms in and over the lock tabs and
lift the battery retainer.
• Lower the battery retainer over
the battery.
• Fit the battery retainer arms down into the slots in the vehicle.
• Press the battery retainer arms out over the lock tabs to snap
and secure the battery retainer arms in the slots.
• Re-assemble the vehicle seat.
• Place the battery upright in the battery compartment.
• Place the foam spacer in the battery compartment, behind
the battery.
• Plug the battery connector and motor harness connector
together. Push firmly to make sure the two connectors are
completely joined.
16
BATTERY INSTALLATION
P8990a-0920
Seat
Tab
1
• Press the tab under the back of the seat and lift to remove
the seat.
Slot
Slot
2
3
6V Battery
Motor
Harness
Connector
4
Arm
Arm
Slot
Slot
Battery Retainer
Arms