Filter
Top Products
P8990a-0920
• Press firmly on the front of the cowling to snap the four, front
tabs into the slots in the vehicle. Make sure the side and rear
tabs stay aligned with the slots.
Note: Pull up on the front of the front end of the vehicle while
pressing down on the cowling to make sure the front tabs snap
into the slots.
11
ASSEMBLY
P8990a-0920
7
• Press the tab under the back of the
seat and lift to remove the seat.
• Make sure the motor harness wires are
positioned in the channel to prevent
them from being pinched between the
cowling and vehicle.
Cowling
Shifter Handle
Side Tab
Side Tab
Rear Tab
6
• Fit the rectangular opening in the cowling over the
shifter handle.
Note: You may need to flex the shifter to the side to fit the
cowling over the high speed lock-out screw.
• Align the front, side and rear tabs on the cowling with the slots
in the vehicle. DO NOT snap the tabs into the slots.
PRESS COWLING HERE
To Snap Front Tabs
PULL VEHICLE BODY
UP HERE
To Snap Front Tabs
• Press firmly on each side of the cowling to snap the four side
tabs into the slots in the vehicle. Make sure the rear tab stays
aligned with the slot.
• Press firmly on the back of the cowling to snap the rear tab
into the slot in the vehicle.
9
PRESS HERE
To Snap Rear Tab
8
Front Tabs
Front Tabs
Motor
Harness
T
M
PRESS HERE
To Snap Side Tabs