Filter
Top Products
LOCKED
POSITION
13
Please Note: If you have already charged your
Power Wheels
®
battery for at least 18 hours, you may
want to install the battery in the battery compartment
before assembling the seat to your vehicle. Please refer
to the Battery Installation section beginning on page
15 for instructions.
• Insert the tabs on the front of the seat into the slots in
the vehicle body. Make sure that the tab on the seat's
lock fastener is aligned with the slot in the vehicle body.
• Press down on the back of the seat to snap the tabs on
the back of the seat into the slots in the vehicle body.
Lock
Fastener
Tabs
19
Assembly
Inset
Tab
Tab
20
• Use a slotted screwdriver to rotate the lock fastener
1
/
4
turn to the locked position . Always secure the lock
fastener to prevent children from accessing the battery.