Filter
Top Products
10
7
• Position the handlebar upright.
• Fit a handgrip onto one end of the handlebar.
Helpful Hint: If the handgrip is difficult to slide onto the
handlebar, moisten the handgrip with warm water before
fitting it onto the handlebar.
• Repeat this procedure to fit the other handgrip onto
the handlebar.
Handlebar
Handgrip
Steering
Column
Steering Column
Bushing
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Fit the steering column bushing onto the straight end of
the steering column.
9
• Insert the curved end of the steering column through the
rectangular opening in the vehicle body.
• Rotate the steering column bushing
1
/
4
turn and fit it into
the rectangular opening in the vehicle body.
Vehicle Body
Rectangular
Opening
Steering Column
Bushing
10
• Insert the connector end of the handlebar wire harness
into the rectangular opening in the handlebar.
• Feed the handlebar wire harness through the handlebar.
• Push firmly on the button end of the handlebar wire
harness to snap into the rectangular opening.
Button End
Connector
End
5
Bottom View
6
• Turn the handlebar upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar.
• Push firmly on the handlebar wire harness near each of
the guides to secure the wire in the underside of the
handlebar.
Handlebar
Wire Harness
Assembly
Handlebar
Guides
FUEL
EF
RPM x 100
FUEL
EF
RPM x 100
8
• Apply labels #7 and #8 to the handlebar, as shown.
7
8
Steering
Column