Filter
Top Products
Pb
Battery Installation
H
Important Note: Use only a Power Wheels
®
12 volt battery.
Use of any other battery will damage your vehicle. Make
sure that you charge the battery for at least 18 hours using
the enclosed Power Wheels
®
12 volt charger before
operating your vehicle for the first time. Charge the battery
for at least 14 hours after each use of the vehicle. Never
charge the battery longer than 30 hours. Failure to follow
these instructions may damage your battery and will void
your warranty. It is easier to install the battery before
assembling the hood to your vehicle. If you have already
assembled the hood to your vehicle, you may want to
remove it to install the battery.
1
2
3
• Lift the hood to access the battery compartment.
• Place the Power Wheels
®
battery upright in the
battery compartment.
• Insert the looped end of battery retainer ( ) into the slot
in the vehicle body near the dash.
• Squeeze the battery retainer arms ( ) and fit them into
the slots in the vehicle body.
™
Battery
Compartment
Hood
Motor
Harness
Connector
Front of Vehicle
Pb
Battery Retainer
Slot
Slot
Arm
Looped End
23
1
2
1
2
• Plug the motor harness connector into the battery.
Pb
Motor Harness
Connector
Battery
4
Battery