Fisher-Price 74526 Motorized Toy Car User Manual


 
Assembly
15
14
Fit the lens tabs on the back of a lens assembly into the
headlight slots in the grille.
Press firmly to snap the lens assembly into the grille.
Repeat this procedure to snap the other lens assembly
into the grille.
Grille
Tab
Slot
13
Brush Guard
Bumper
Fit and hold the brush guard against the front bumper.
Insert two #10 x 1" screws through the front of the brush
guard and into the bumper.
Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Fit a spacer tube between the grille and the
back of the brush guard, as shown.
Insert a #8 x 4" screw through the brush
guard and spacer tube and into the hole in
the grille.
Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Repeat this procedure on the other side of
the grille.
Spacer
Tube
15
Headlight
Lens
Wide Notch
Wide Tab
Lens
Guard
12
Fit the wide notch in the side of a headlight lens under
the wide tab on a lens guard.
Press firmly on the inside of the headlight lens to snap it
into the lens guard.
Repeat this procedure to assemble the other headlight
lens to the remaining lens guard.