Filter
Top Products
NAVI-B VERSION 1.01
(iv) If the NAVI-B is receiving valid GPS positions, click the icon on
toolbar by the up-down button (see marked button in figure
below), the user can see the updated data of longitude, latitude,
altitude, date time etc. For more detailed information about the
using of SiRFdemo software, please download the
SiRFdemo.pdf
manual, which is also available on our web page.
(v) In order to set the desired update rate of the supported NMEA
protocols, click the Action menu on the Main Menu, then select
the item Switch to the NMEA Protocol …. The dialog box
below will appear. Now select the required update rate in the
corresponding box of protocol and click the Send button. The
result will be displayed on the Development Data screen.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 19