Filter
Top Products
Step 1 To install the GPS/MAP application software
Before operation the CF LP GPS, make sure the GPS application software is properly
and completely installed in the iPAQ Pocket PC.
To install the GPS/MAP application software, please consult and follow those
operating procedures described in the user’s guide of the GPS application software
and the iPAQ Pocket PC, respectively. Make sure the GPS application installed
completely and correctly.
In the included CD-ROM, there is the “Crux_View Test Program”(Evaluation version)
for testing purposes. Please follow the step-by-step procedure indicated and
described in the CRUX_VIEW(Evaluation) Manual file(in .pdf format). Figure 6 is a
screen shot example of Crux_View Test Program (indicating the Satellites in view
and Signal-Level View).
Note:
(a) The Crux_View Test Program is an evaluation version program and only for
testing purpose.
(b) The Crux_View program is only for the CF LP GPS to be used with the Pocket
PC 2002 or 2003.
(c) Crux_View supports ARM(StrongARM/X Scale) based Pocket PCs.
Figure 6
19