Filter
Top Products
How to use Preferences Overview of Preferences
14 15
Press the V/M button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
AUTOPOWER
UNITS
VOICE
BRIGHTNESS
MARKERS
OVER SPEED ALERT
DETECTOR BRAND
AUTOMUTE
METER
* Restoring the
Factory Default
Settings
To restore your
PASSPORT to its
original factory
settings, press and
hold the “V/M” and
“CRU” buttons while
turning the power
on. A Reset
message will be
displayed,
accompanied by an
audible alert,
acknowledging the
reset.
Pilot Spd Comp
Pilot Compass
Pilot .>
Pilot V
Pilot SPD
aPwr ON
aPwr OFF
Units ENG
Units MET
Voice ON
Voice OFF
Brt Auto
Brt Dark
Brt
Min
Brt
Med
Brt Max
Marks DFT
Marks MOD
rCam ON
or OFF (default is on)
sCam ON or OFF (default is on)
sTrap ON or OFF (default is on)
Othr ON or OFF (default is on)
oSpd ON
oSpd OFF
Brnd OFF
ESCORT
BEL
aMute ON
aMute OFF
Same options for your detector brand
Press the MRK button
to change your setting
within a category
* Speed and Compass
Compass
Scanning dot
Vehicle voltage
Vehicle speed
* Shuts down after 3 hours of non-movement
AutoPower feature is off
* Speed/distance in English units
Speed/distance in Metric units
* Voice announcements on
Voice announcements off
* Automatically adjusts display brightness
Dark mode
Minimum display brightness
Medium display brightness
Maximum display brightness
* Default settings
Markers have been modified
* Alerts when maximum speed reached (30-95 mph)
OverSpeed off
For ESCORT detectors
For Beltronics detectors
* Automatically reduces the audio during alert
AutoMute feature is off
There are 10 user-selectable Preferences
so you can customize your SC55 for your
specific driving needs. The buttons
labeled “V/M” and “CRU” are used to enter
Preferences, REVIEW your current
settings, and to CHANGE any settings as
desired. The word “PREF” is located on
the top of the SC55, and is highlighted in
graphics. Pages 16-18 explain each option
in more detail.
How to use Preferences
1 To enter Preferences, press and hold
the “V/M” and “CRU” buttons down for 2
seconds. The unit will beep twice, and will
display the word Prefs.
2 Press the “V/M” button to review the
current settings. You can either tap the
button to change from item to item, or hold
the button to scroll through the items.
3 Press the “CRU” button to change
any setting. You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options.
4 To exit Preferences, simply wait 8
seconds without pressing any button, or
press the power button
. The unit will
display
Complete, and return to normal
operation.
An example
Here is how you would change PASSPORT’s
Pilot option:
1 Enter Preferences by holding both the
“V/M” and “CRU” buttons down for 2
seconds. PASSPORT will beep twice and
display Prefs.
2 Then hold the “RVW” button down.
PASSPORT will scroll through the categories,
starting with Pilot
(Pilot).
3 Release the “RVW” button when
PASSPORT displays the Pilot item. Since the
factory setting for Pilot is Speed and Compass,
PASSPORT will display Spd Comp.
NOTE: If you accidentally don’t release
the “RVW” button in time, and PASSPORT goes
to the next category, simply hold the “RVW”
button down again. Once you’re back to your
desired category, release the “RVW” button.
4 Press the “CHG” button to change from
Spd Comp to Compass.
5 To exit Preferences, simply wait 8
seconds without pressing any buttons, or
press the power button
. PASSPORT will
beep and return to normal operation
.