Filter
Top Products
Your new Solo S2 is the most advanced cordless radar,
laser and safety detector available.
The Solo S2 includes full X, K, SuperWide Ka, and
Safety Warning System radar capability, front and rear
laser detection, digital signal processing (DSP) for
superior range and reduced false alarms, our patented
Mute and AutoMute, audible and visual band alerts,
and all the performance you’d expect from Escort.
In addition, the Solo S2 introduces a new level of
revolutionary cordless performance and innovative
features:
• New long-range cordless performance for both
radar and laser
• New AutoPower feature maximizes battery life
• New brilliant high-resolution LCD display with
LED backlight
• Advanced EZ-Programming lets you customize up
to 10 features
• Exclusive AutoSensitivity mode virtually eliminates
false alarms, plus Highway and City settings
• ExpertMeter tracks and displays up to 8 radar
signals simultaneously
• Detects and displays up to 64 Safety Warning
System messages
• Compatible with Laser Shifter
™
ZR3
If you’ve used a radar detector before, a review of
the Quick Reference Guide on pages 6 and 7, and the
EZ-Programming information on pages14-19 will
briefly explain the new features.
If this is your first detector, please read the manual
in detail to get the most out of your Solo S2’s
outstanding performance and innovative features.
Please drive safely.
FCC Note:
Modifications not expressly approved by the
manufacturer could void the user’s FCC granted
authority to operate the equipment.
EZ-Programming Details ̈
Solo S2’s Factory Settings
To reset Solo S2 to its original factory
settings,press and hold the Mute and
M (Mode) buttons while turning Solo S2
on.Solo S2’s display will provide a “Reset”
message,accompanied by an audible
alert,acknowledging the reset.
Solo S2 Quick Reference Card
̄ Remove card along perforations ̄
̄ Remove card along perforations ̄
There are 10 user-selectable options so you
can customize your Solo S2 for your own
preferences.
The buttons labeled VOL and M (Mode)
are also used to enter the Program Mode,
REVIEW your current program settings,and
to CHANGE any settings as desired.The
words PGM,RVW,and CHG are located on
the front of the detector,and are high-
lighted in blue graphics.
How to use EZ-Programming
1To enter Program Mode, press and
hold one of the VOL buttons and the M
button down for 2 seconds. (The unit
will beep twice,and will display the word
“Program”).
2Then press the RVW button to review
the current settings.(You can either tap
the button to change from item to item,or
hold the button to scroll through the items).
3Press the CHG button to change any
setting. (You can either tap the button to
change from setting to setting,or hold the
button to scroll through all the options).
4To leave Program Mode, simply wait
8 seconds without pressing any button.
(The unit will display Complete,beep 4
times,and return to normal operation).
An example of EZ-Programming:
Here is how you would turn Solo S2’s
AutoMute feature off.
1 Enter the Program Mode by holding one
of the VOL buttons and the M button down
for 2 seconds.Solo S2 will beep twice and
display
Program.
2 Then hold the RVW button down.
Solo S2 will scroll through the categories,
starting with Contrast (
Contr), then Pilot
Light (
Pilot), then Auto Power (aPwr),
then Power-on sequence (
PwrOn), then
Signal Strength Meter (
Meter), and then
AutoMute (
aMute).
3 Release the RVW button when Solo S2
shows the AutoMute item.Since the factory
setting is for AutoMute to be on, Solo S2
will display
aMute ON.
If you accidentally don’t release the
RVW button in time, simply press the other
VOL button to scroll back to the desired
category.
4 Press the CHG button to change from
aMute ONto aMute OFF.
5 To complete the Programming,simply
wait 8 seconds without pressing any button.
Solo S2 will display
Complete,beep 4
times, and return to normal operation.
32
Congratulations