Escort S2 Radar Detector User Manual


 
Quick Reference Card 3-4
Quick Reference Guide 6-7
Installation 8-9
Battery Installation 8
Optional12-volt SmartCord 8
Mounting Location 8
Windshield Mount 9
Controls and Features 10-13
Power On/Off 10
AutoPwr 10
•Volume Control 10
Power-on indication / Alert 10
Mute 10
AutoMute 10
SmartMute
11
Battery Status / Voltage 11
Low Battery Warning 11
Mode Switch (Highway/Auto/City) 11
Brightness 11
Audible Alerts 12
Signal Strength Meter 12
ExpertMeter 12-13
EZ-Programming 14-19
•How To Use EZ-Programming 14
Example of EZ-Programming 14
Overview of EZ-Programming 15
Details of EZ-Programming 16-19
Technical Details 20-25
Interpreting Alerts 20-21
How Radar Works 22
How Laser Works 23
How Safety Radar Works 24-25
Service 26-31
•Troubleshooting 26-27
Service 28
•Warranty 28-29
Accessories 29
Specifications 30
Registration 31
̄ Remove card along perforations ̄
̄ Remove card along perforations ̄
Table of Contents
54
Solo S2 Quick Reference Card
*Solo S2’s Factory Settings
Press the RVWbutton to go Press the CHGbutton to change
from one category to the next your setting within a category
CONTRAST
Contr 3 *Contrast level 3
Scrolls thru five contrast levels:1-5
PILOT LIGHT Pilot HWY *Full word:Highway or Auto or City
(Options using Pilot H Letter:H or A or C
12-volt SmartCord) Pilot H.> Letter,with scanning dot
Pilot + Symbol:+ or
or --
Pilot +.> Symbol,with scanning dot
Pilot +> Scanning symbol
AUTO POWER aPwr ON *Turns Solo S2 on and off automatically
aPwr OFF Turn Solo S2 on and off manually
POWER-ON SEQUENCE PwrOn STD *Standard power-on sequence
PwrOn FST Fast power-on sequence
SIGNAL STRENGTH METER Meter STD *Standard signal strength meter
Meter EXP Expert Meter
AUTOMUTE aMute ON *AutoMute on
aMute OFF AutoMute off
AUDIOTONES Tone STD *Standard tones
Tone LOUD Loud tones
CITY MODE SENSITIVITY City STD *Standard City mode sensitivity
City LoX Low X band sensitivity in City Mode
City NoX No X band sensitivity in City Mode
BRIGHTNESS Brt AUTO *Brightness is controlled automatically
Brt MIN Minimum brightness when turned on
Brt MED Medium brightness when turned on
Brt MAX Maximum brightness when turned on
Brt DARK Full Dark Mode when turned on
BANDS Bands ALL *All bands enabled
Bands MOD One or more bands are enabled
Turn bands “ON” or “OFF” by
pressing the mute button
XONor OFF *X-band detection on
KONor OFF *
K-band detection on
Ka ONor OFF *Ka-band detection on
LSR ONor OFF *Laser detection on
SWS ONor OFF *SWS detection off
VG2 ONor OFF *
VG2 detection off