Filter
Top Products
©2007 Edelbrock Corporation
Brochure #63-0478
Catalog #70410
Rev. 7/07 - DC/mc
Page 10 of 16
3.0 Electrical System Installation
1
2
3
4
5
6
7
8
9
10
11
12
13
14-16
3.1 Nitrous Electrical Components Bill of Materials (BOM)
Important: The wiring hardware and instructions included with this kit are intended for 12-volt electrical systems only. Before
attempting to wire your Edelbrock Performer Nitrous Oxide System, examine and follow the wiring diagram on the following page. Please
call the Edelbrock Technical Department with any questions concerning electrical wiring.
Item # Qty. Description
❑ 1 1 Wide Open Throttle Module
❑ 2 1 6ft. 16 AWG Wire Assembly, Fused, In-Line (Red)
❑ 3 1 On/Off Round Rocker Switch
❑ 4 2 14/16 AWG Female Spade Connector Nylon Insulated (.187)
❑ 5 4 16/22 AWG Insulated Butt Connector
❑ 6 1 15AMP ATO Blade Fuse
❑ 7 4 18/22 AWG Male Spade Connector Nylon Insulated
❑ 8 3 14/16 AWG Ring Terminal 3/8” Stud Nylon Insulated
❑ 9 1 18/22 AWG Ring Terminal 3/8” Stud Nylon Insulated
❑ 10 4 18/22 AWG Female Spade Connector Nylon Insulated
❑ 11 2 14/16 AWG Male Spade Connector Nylon Insulated
❑ 12 3 14/16 AWG Female Spade Connector Nylon Insulated
❑ 13 3 Splice, Insulated Displacement (16/18 AWG)
❑ 14 1 6ft. 16 AWG Wire (Blue)
❑ 15 1 6ft. 16 AWG Wire (Yellow)
❑ 16 1 6ft. 16 AWG Wire (Black)