Filter
Top Products
Page 2 of 21©2002 Edelbrock Corporation
Rev. 10/02
Brochure No. 63-0144
Catalog #70406
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this installation manual fully before installing this system.
You will need to have available the following tools:
Hand
Tools
❑ Socket set including ratchets and extensions
❑ Screwdrivers
❑ Pliers
❑ Bench vise
❑ Wire crimping pliers, wire strippers
❑ Floor jack
❑ Vehicle jackstands
❑ Safety glasses
Power
Tools
❑ Power drill
❑ Drill bits (1/4”, 1/2” and 3/8”)
You should understand the following skills:
❑ Power tool safety procedures
❑ Undercar safety procedures
❑ Proper measuring techniques
❑ Proper electrical assembly techniques
❑ Basic engine operation and tuning
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our technical
support hotline at
1-800-416-8628 before you start your engine.
℡