Edelbrock 70405 Automobile Parts User Manual


 
©2002 Edelbrock Corporation
Brochure No. 63-0029
Rev. 12/02
Page 3 of 26
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools:
Socket set including ratchets and extensions
Screwdrivers
Pliers
Bench vise
Wire crimping pliers, wire strippers
Floor jack
Razor blade or other sharp, flat edged cutting instrument
Vehicle jackstands
Safety glasses
Timing light
Power Tools:
Power drill
Drill bits
You should understand the following skills:
Power tool safety procedures
Undercar safety procedures
Proper measuring techniques
Proper electrical assembly techniques
Basic engine operation and tuning techniques which include:
-Fuel pressure measurement techniques
-Timing adjustment techniques
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Technical Support Hotline at 1-800-416-8628
before you start your engine.