Page 5 of 22
Catalog #70403
Brochure No. 63-0147
©2003 Edelbrock Corporation
Rev. 1/03
1.0 Introduction to your Edelbrock 1999-2003 Ford Lightning Performer EFI Nitrous System
Within the pages of this manual is information, safety tips and operation instructions for your new Edelbrock Nitrous System.
Watch for these symbols to know where to go for information.
….There is safety related information here.
...shows where technical information about your vehicle or specific skills that may help during
installation.
….call Edelbrock Technical support hotline for more information.
1.1 General Information
The Edelbrock Performer EFI Nitrous System (Part Number 70403) is designed for the 1999 to 2003 Ford
Lightning SVT with stock or slightly modified engines. Horsepower and torque increases can vary with
equipment upgrades and modifications.
This system utilizes one nozzle that is installed in the intake boot just before the throttle body and after the air filter
unit. The additional fuel needed is supplied by the vehicle’s standard fuel system.
This system has been designed with some flexibility as to where certain components can be located to allow easy
installation on vehicles with upgraded or modified equipment. The solenoid and microswitch brackets are designed
to be manipulated (bent, cut, twisted, etc.) and the electrical components have properly-sized and ample lengths of
wire.
This system includes the bottle (shipped empty), bottle feed line and universal footprint steel bottle brackets. The
mounting brackets also include rubber insulators to protect the surface of your nitrous bottle while mounted in the
brackets. When installing your nitrous bottle, pay close attention to the installation instructions for the location of
your bottle. Make sure that the installation of your bottle does not interfere with any systems that may lie under the
location where you plan to drill holes for mounting the brackets.
Call your local automotive store, motorcycle shop or race track for refilling of your bottle. Trust a professional to
properly fill your bottle and reference your installation manual when re-installing your filled bottle back into your
vehicle.
Always take care when handling a full bottle of nitrous oxide. Please reference this manual for further safety
measures to take during the handling of a nitrous oxide bottle.
Please follow all safety methods during the installation of your Edelbrock Nitrous System, and follow all vehicle
regulations and road laws when using your nitrous system.
℡