Filter
Top Products
Page 3 of 22
Catalog #70403
Brochure No. 63-0147
©2003 Edelbrock Corporation
Rev. 1/03
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand
Tools
❑ Socket set including ratchets and extensions
❑ Screwdrivers
❑ Pliers
❑ Bench vise
❑ Wire crimping pliers, wire strippers
❑ Floor jack
❑ Vehicle jackstands
❑ Safety glasses
Power
Tools
❑ Power drill
❑ Drill bits (1/4”, 1/2” and 3/8”)
You should understand the following skills:
❑ Power tool safety procedures
❑ Undercar safety procedures
❑ Proper measuring techniques
❑ Proper electrical assembly techniques
❑ Basic engine operation and tuning
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Technical Support Hotline at 1-800-416-8628
before you start your engine.
℡