2001 Edelbrock Corporation
Brochure No. 63-0040
©
Rev. 11/01
Page 2 of 25
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools
• Socket set including ratchets and extensions
• Screwdrivers
• Pliers
• Bench vise
• Wire crimping pliers, wire strippers
• Floor jack
• Razor blade or other sharp, flat edged cutting instrument
• Vehicle jack stands
• Safety glasses
• Timing light
Power Tools
• Power drill
• Drill bits
You should understand the following skills:
• Power tool safety procedures
• Undercar safety procedures
• Proper measuring techniques
• Proper electrical assembly techniques
• Basic engine operation and tuning techniques which include:
-Fuel pressure measurement techniques
-Timing adjustment techniques
Anytime you have questions or concerns with your Edelbrock Nitrous System, please
call our technical support hotline at
1-800-416-8628 before you start your engine.
''